How To Clean A Bore Mop

An extremely thick cotton mop is known as a bore mop. It must have a bore diameter equal to that of the gun. People who own guns need them. The term “bore mop” is familiar to gun owners. The gun cleaners known as bore mops push the bore in both directions.

Most people usually clean their homes by using comprehensive dishwashing liquids, rinsing them off with hot water, and leaving the mop to dry thoroughly before utilizing it.

How To Store A Bore Mop

The majority of people store their jags, brushes, adapters, mops, and other items in a disorganized manner in a catch-all drawer or gap in their gun box. That’s great if you only have a few weapons with clearly defined caliber measurements, but if you’re using weapons that fire calibers of ammunition that can’t be seen with the human eye, you’re taking a significant risk.

Since jags, wipers, and mops are caliber-specific (or at the very least, cover a small range of caliber sizes), keeping them apart from other size equipment is crucial for the effectiveness of gun cleaning, for making sure barrels are cleaned thoroughly, and to avoid tools getting trapped in your barrel.

We have started using Jag & Brush Cases from MTM-Case Gard to more effectively manage our pistol cleaning process. Clamshell in style, these enclosures have dimensions of 3.4×5.11×1.24 inches. For additional security, the box’s hinged lid incorporates a snap-lock latch. There is plenty of space for jags, brushes, mops, and cleaning rod adapters in the glass case’s three compartments, which have three rooms each.

We have started grabbing a few of these containers every time we visit a sporting goods store because we have several rifles, handguns, and pistols with varied chamber sizes. We’ll buy a few here and there because they’re only $4–$5 each, and our wallet won’t know the difference.

When we get home, we’ll pack a box with our cleaning supplies according to quality and mark it, so we know precisely what’s inside. The ability to store them effectively in a range box or a drawer on our workbench is another advantage of employing similar-sized boxes like these. We just take the pack we need and head out when we need to deliver a cleaning kit to the range.

How To Clean A Bore Mop

You can use a caliper to estimate their dimensions and organize them if you have a cabinet stuffed with loose, unmarked jags and brushes and are unsure which ones suit what (the ones we acquire rarely appear to be marked by caliber).

That might sound little, but depending on the thickness of the patch used, a few inches can be the difference between a proper cleaning and a “too tight” jag/patch combo when you’re forcing a patch of unknown thickness down a bore with strange fouling buildup.

This is why it is occasionally a good idea to test various jag-and-patch pairings to make sure you have one that fits snugly enough to remove the fouling from the barrel but not too snugly expels all of the solvents or puts undue strain on the cleaning rod.

The Things Consider When Getting A Bore Mop

You should purchase a gun cleaning brush or mop that is gauge- and caliber-specific and has an arrow indicating the size of the stem.

It gives you the ability to consistently have the ideal brush grip. You can look for a core wire that resists corrosion and has a tighter twist and a longer brush life.

Before buying a gun cleaning mop, you should understand its use. Since steel-bristled chamber brushes are a popular option, several specialty brushes now feature them. Decide on a bronze-phosphor composition as a result, as this is advised (Nylon and bronze).

Although the steel version used to be practical, those who want a boring safe do not prefer it. While brass is softer and doesn’t scuff the bore, brass is the opposite.

Even though it is based on reference, people who use bronze brushes feel cleaner. The cleaning and scrubbing capacity of nylon brushes is one of their biggest draws.

The nylon brush works best for removing fouling and cleaning up loose carbon rather than scrubbing and removing the more challenging stuff.

How To Use The Spray Solvent To Clean A Bore Mop

Spray some cleaning or solution inside the gun bores as a preliminary step. The phosphor bronze-enhanced bore mop can be used as a cleaning rod.

The pole already has the bronze brush connected. It is beneficial to use it repeatedly because it aids in removing the shot and powder remnants.

Take the Brush Away

Care should be taken when pushing the mop to ensure it reaches every gun chamber. Give a twist once the soft mop is inside to allow the boring map to enter. Because it is a tight fit, pushing is necessary. It fits snugly, thanks to the design.

Be Ready for Pushback and Squealing

When using the bore mop, you might hear some squeaking and run into resistance when attempting to push them through the bores with the rod. The mops could become extremely filthy when you’re cleaning, so you must properly dispose of them.

But if you need to remove some minor debris, you can insert another mop and a rod into each chamber. But before you think about cleaning your rifle with multiple chokes, ensure the choke tubes are in place.

Last Step

Finally, the identical mops pass them through the bores after spraying them with gun oil. The bores will be protected in the storage location by a thin film of clean oil.

So that you can use them to clean guns the next time and store the mops safely. Keeping the bore mops safe is sufficient because they do not get too dirty.

 

Selecting a Bore Mop Cleaner

An essential first step is selecting a bore mop cleaner. These mops will work wonders at getting rid of the extra solvent and fouling. For cleaning gun bores, a bore mop is just as effective as soft cotton swabs.

It works well for applying oil to the cannon bore as well. The cleaning swabs for guns are made entirely of cotton. It is thoroughly tested and made to withstand the harshest conditions.

The 100% cotton mops are known as “bore mops” and are used for polishing, drying, and applying lubricants and cleansers to the bore. Threads and non-brass cores on the mop prevent copper fouling from giving misleading readings when utilizing the bore.

It needs proof-positive bore mops because they are constructed with high-quality materials and careful attention to every detail. Every shooter’s range box must contain this bore mop.

How To Clean A Bore Mop

From.17 cal to.50 cal, bore mops are offered. Bore mops are essential since they don’t harm the bore. Always demand a brush mop with bristle brushes because they are 100% safe, unlike stainless steel brushes, which may damage the bore.

As several brushes are available, make sure that whatever kind of brush you use in the barrel is softer than steel to prevent damage to the rifling.

Questions To Ask Before Purchasing A Bore Mop

To complete the necessary cleaning in a bore, there are different brushes available. However, using the proper equipment guarantees that you receive the most significant outcome. It is advised to get a bore mop or brush with a stem size indicator that is gauge- and caliber-specific.

You can enjoy getting the brush in the right place every time. You may always search for a core wire with superior bristle retention, a tighter twist, and long-lasting meetings while also being resistant to corrosion.

  • Know how to use a bore mop before purchasing one. The best option is to get a bronze-phosphor combination (Nylon and bronze). It is a popular option, and several specialty brushes now include steel-bristled chamber brushes.
  • Despite its convenience, steel is not the preferred material for those looking to purchase a bore safe. Brass is softer and won’t damage the bore.
  • Bronze brushes provide a better clean; however, this depends on personal preference.
  • Rather than scrubbing and extracting the more complicated things, the nylon brush is perfect for eliminating fouling and sweeping up loose carbon.
  • Pay attention to the various solvents.
  • Brass brushes work well with cleaners made to get rid of rust, lead, powder, carbon buildup, and metal fouling.

Because it can be cleaned with chemicals like copper removers, nylon is a fantastic material choice. These substances don’t damage nylon and are safe.

Conclusion

For cleaning guns, be sure to get pull-through equipment. Another vital option is the length of the brush. Brushes or mops with longer bores connected to the cord do not work with the action.

The smaller bore brushes, however, only provide modest breach actions. The brush size is difficult to determine because the gauges and calibers vary.

Buying a brush length that works for your gun is essential because not all rifles are made equal. You ought to be able to pull as usual.

Leave a Comment

error: Content is protected !!