What To Do About Standing Fan Making Clicking Noise

Have you ever gone nuts by a standing fans obnoxious clicking or rattling noises? If so, you’ve come to the correct place, and I think I might be able to help with some straightforward troubleshooting methods that might help to get your fan working silently.

The blade iron of the majority of fans is secured by three to four screws per fan blade. A “blade tick” may result from any of these screws being slightly loose.

Reasons Standing Fans Might Make Clicking Sound

It is essential to identify the problem that is making your standing fan click and generate noise before you can resolve it. Without contacting a professional, there are several methods you might be able to handle on your own.

Standing Fan Making Clicking Noise

This issue could have various root causes. You can do the following things to find out what caused it:

Defective Fan Blades

One of the potential reasons why your standing fan is clicking could be that one or more of the blades are damaged. This might have happened if it ran into something while spinning, for example, or for some similar reason. This can be determined since there will likely be only one blade making the thumping sound rather than just a click.

You can also take the blades off to check if one of your fan’s blades is bent, cracked, or otherwise damaged. When you approach and are close to them, you might be able to notice the damage even though they might not appear damaged from below.

It’s critical to repair any blades that are obviously broken right away. Most hardware stores and online retailers sell new fan blades. Perhaps you could fix the edge yourself if you’re feeling skilled. It’s advisable to leave that to a professional if the issue is more serious.

Misaligned Motor Screws

Fan wobble and clicking might be brought on by loose fan motor screws. To ensure they are tight, check the screws on the fan motor. If the screws appear loose, try using a screwdriver to tighten them. It’s necessary to inspect the screws even if they can’t all be tightened because not all fans have them.

Loose Links

Verify that any electrical connections are tight and secure on your fan or at an outlet. To accomplish this, tighten any screws or connectors that look to be loose with a screwdriver. A standing fan’s clicking noise might occasionally be caused by loose connections.

Bent Motor Shaft

There can be a problem with the motor shaft, another potential explanation for a clicking standing fan. You should check the motor if it makes any peculiar noises, such as grinding, scraping, or other sounds. When it turns, it makes a noise you can hear to determine if it is the source of your issue.

The issue is likely one of the other issues on this list, though, if all you hear is a simple click.

Unsteady Mounting Bracket

To make sure that your mounting bracket is not in any way loose or unstable, check it. It’s crucial to avoid over-tightening anything because doing so could sometimes result in stripping the bracket from the screws. A new set of screws that are stronger and won’t strip easily when you try to tighten them up can be used to fix this.

Rusted Bearings

The bearings in an old standing fan could be worn out, making it click. Compared to some of the other issues on our list, this one is more challenging to address, but it is not insurmountable. If you believe that this is the issue, you might try lightly lubricating the bearings. A bearing lubricant is available online or at the majority of hardware stores. Follow the directions provided with the grease and proceed with extreme caution.

Blocking Blades

Consider lubricating the fans if necessary. Blades that are obstructed can also interfere with rotation, resulting in the fan clicking. If so, apply lubricant (like WD-40) to a clean cloth and rub in small circular motions until the fan blades are thoroughly oiled.

Ways To Make A Standing Fan Quieter

In the sweltering summer months, oscillating fans can come in quite handy. They push air around the room to produce a natural cool air that will aid you in surviving a heat wave. They can be adjusted to wiggle side to side, up and down, or both. However, in addition to keeping you cool, oscillating fans tend to drone, click, whirl, and rattle, occasionally to the extent that they drive you crazy.

Fans occasionally require tune-ups and maintenance, just like most mechanical devices do. The clattering of an oscillating fan can be brought on by worn-out parts that stop turning or by loose screws.

Here are several ingenious ways to make an oscillating fan quieter, whether it’s a tower, standing, or desktop model.

Clean The Fan Blades First

Regularly cleaning a loud fan is among the most straightforward solutions. The oscillating fan might become out of balance due to dust accumulation on the blades, creating a whirling and knocking symphony.

The fan’s bearings may become overloaded by accumulated dirt, making it operate noisily. Take the fan apart once a month, and then use a damp sponge or rag to remove the dust and debris from the blades. Reassemble it after that.

Maintain Level

Why does an oscillating fan create a clicking sound? The fan may be resting on an uneven surface, such as cracked floorboards, a slanted table, or an irregular desk, leading the base to sway slightly and repeatedly touch the floor below. Place the fan in a level area to fix the problem and disperse the blades’ weight more evenly. Once the clicking has stopped, move the fan into position.

Position It On A Carpet

Another technique to quiet an oscillating fan is to place it on a thick carpet or rug, which acts as a soundproofing device by dampening and partially absorbing noise.

It’s an easy strategy that works reasonably well, and your downstairs neighbours will appreciate it.

Purchase Anti-vibration Pads

Anti-vibration pads are available if your home is carpet-free or if the padding under the base of your fan is missing or worn out. They should be used to absorb sound and vibration from fans by being placed between the base of the fan and a desk, table, or another surface. They are frequently made of rubber or cork.

Standing Fan Making Clicking Noise

Secure Bolts And Nuts

A fan’s external components (not the internal motor) can loosen over time. Verify the housings and guards are securely fastened to the fan and that they are taut. After retightening, if the whirring noises still occur, take the fan apart and inspect the blade alignment.

Oil The Engine

Many recent fans don’t enable access to the motor inside, but if yours does, you can lubricate the motor’s working parts with a synthetic lubricant. Use no more than two drops at once to avoid risking motor damage.

Get a New Fan

A fan may occasionally be too old or worn out to be fixed. Cut your losses in this situation and purchase a brand-new, quieter type, such as a Lasko tower fan.

How To Clean Standing Fan Motor And Heat Sink

Step 1: Scrub any dust or dirt off the back of the motor housing. The motor housing interior can be viewed by turning the fan around. With a microfiber cloth, gently brush the dust away. Dust and debris accumulated on the electric fan’s rear should be removed, as well as the cowling’s complete interior.

When there is insufficient ventilation, the motor housing’s inside heat and dust cannot be removed. Because of this, standing fans, especially those equipped with overheat protection, won’t turn and, when the temperature rises too high, will turn off automatically.

Be careful when cleaning around the motor; avoid using water. Damage to the fan or a short circuit can result from moisture in the engine.

Step 2: The heat sink holes in the plastic casing should be blown out using a compressed air duster. Before you lubricate the standing fan, pick up the vent cover you unbolted and keep it far from the engine.

Dust between the heat sink grids is challenging to clean, so blow compressed air around the sides of the housing to remove it. Apply a dry rag to the cowling to clean it. The standing fan may not function as intended if the heat sink holes get clogged with dust or debris.

The heat sink cover can be thoroughly cleaned by soaking it in soapy water and letting it dry. But generally speaking, this is not required.

Step 3: Connect the electric fan to the outlet, turn on the switch, and check to see if the fan shaft turns. Plug in the pedestal fan before constructing it. Check to determine if the vertical fan shaft can swiftly revolve by turning on the switch. Reconstitute the stand fan if you can. In that case, you might need to clean the motor.

Reinstall the standing fan assembly by replacing the blades and cover. Reverse the procedure to dismantle the standing fan.

Attach the gasket, secure the reticle to the fan shaft and fasten the bolts on the fan shaft using a tool. Install the blades, so the motor is separated from the grille at the back by the front. The motor cover’s back should now have the plastic heat shield attached, with screws in place. Lock in place after reassembling the front grille.

On the fan again. When you tested the fan, the motor failed, and the blade rotated more slowly than the fan shaft. The fan’s power output is too low to function at maximum speed.


Standing fans that click disturb me. The noise is a sign of a more significant problem that will eventually cause your fan to break. Therefore, it’s critical to address the problem as quickly as feasible.

You might need to hire a pro or completely replace your fan if those don’t work. But if you put in a bit of labor, you can quickly get your standing fan running again. The simplest way to achieve this is to try some straightforward solutions described in this article.

Call a specialist if the procedure makes you uncomfortable. They’ll be able to diagnose the issue with your fan and recommend a workable fix. Of course, it will cost you more to fix it.


Leave a Comment

error: Content is protected !!